Kathrein UFD 515 - Manual (Page 21)

Programme selection
By pressing the
ou
buttons you jump to the next programme and by press-
ing the
-+
buttons you jump to the neighbouring page or enter-in the channel
number with the buttons on the remote control. Confirm your programme selection
by pressing the
O
button, or press the
L
button to exit the programme list and
remain in the programme already set.
Selecting a radio programme by number entry
You can select a different radio programme during a current radio programme by
entering the programme location number. Use the number buttons
1
to
0
for
the purpose of entering the programme location number.
Example You wish to select the radio programme "DLR-Berlin". This programme is stored
under the programme location number 015. (The order of radio programmes is de-
fined in the programme memory and therefore only serves as an example here.)
To select this programme, press the numbers
1
and
5
one after the other. The
receiver waits for about 3 seconds for entry of the next number.
Follow the same procedure for all other programmes – i.e. also programmes with
three-digit programme location numbers. You do not have to enter leading zeros.
A further option of selecting a different programme is to press the
i
button. The
radio programme list is now displayed. In the left column it will provide information
relating to the received satellites, its transmission frequency, the polarisation, the
symbol rate, the bouquet, the scrambling and the parental control. The right side
shows the programme number, the programme broadcaster and the type of recep-
tion signal (free-to-air/ scrambled). By pressing the
ou
buttons you jump to
the next programme and by pressing the
-+
buttons you jump to the neighbouring
page. Confirm your programme selection by pressing the
O
button.
You may also enter-in the desired programme with the number buttons on the re-
mote control.
Press the
L
button to exit the programme list and remain in the already set pro-
gramme.
21