Kathrein UFD 515 - Manual (Page 36)

Setting system parameters
remote control, otherwise the settings will be lost.
Timer menu
See section "Timer settings."
Summer time
See above. Changeover in spring or fall.
Confirm by pressing
L
two times.
TV type
Use the
-+
buttons to specify whether your TV set is a
PAL, ·
·
·
·
·
·
·
·
·
·
Multi-standard
NTSC unit
Confirm by pressing
L
two times.
Picture format
Use the
-+
buttons to select the type of picture format, either
4 : 3 format or
16 :9 format.
Confirm by pressing
L
two times.
Screen
Use the
-+
buttons to select the type of screen display:
conventional (P/S) = standard representation for 4:3 units or
widescreen picture (letter box display off) - in this settings, the widescreen is
required for the 16:9 unit.
Confirm by pressing
L
two times.
A/V mode
Here, you use the
-+
buttons to select the type of video signal which is present
on the Scart socket. Select the signal which your TV set is able to process.
Observe the operating instructions of your television set!
FBAS –composite baseband signal (colour-/picture-/blanking-/synchronising-
signal)
RGB – red-/green-/blue-signal
Y/C – S-VHS signal (luminance/chrominance).
Confirm by pressing
L
two times.
36