Kathrein UFD 515 - Manual (Page 51)

Technical annex
Connection examples
VCR
TV
IF INPUT DIGITAL
920-2150MHz 14/18V max. 400mA
22kHz
VCR AUX UFD 50 5 260 494
TV
IF OUTPUT
DiSEqC 1.1
DATA I/O
AC 88V-264V~ 50/60 Hz
max.30W
Elektroschock-Gefahr! Nicht öffnen
L
R
AUDIO VIDEO
DVB-Receiver
UFD 515
HiFi
UHF/VHF
UHF/VHF
Cinch
Scart
Sat-ZF
Scart
Radio
Sat-socket
ESD 30
1 2
4 3
DC 2
DC 1
DC 3
terr.
H
low/0kHz
V
V
high
H
H
low/22kHz
V
V
high
H
Sat-Position B
Sat-Position A
Switch Band Switch Band
Switch Band
Switch
Band
EXR 904
2 x
Quattro-LNB
UAS 484
Multifeed antenna
analog and digital
Digital Audio
Connection arrangement 1:
Connection of the DVB-S receiver to a TV set, a VCR and a hi-fi system for receiv-
ing and recording digital satellite TV and radio channels. The digital sound output
can be connected to a Dolby Digital system.
The connection requires two SCART cables and one Cinch cable. If your TV is
equipped for stereo, the stereo sound can also be reproduced via the stereo
speakers of your TV set.
The UHF/VHF input of the TV set is connected via the UHF/VHF output and input
sockets of the video recorder to the UHF/VHF output of the Sat socket. This con-
nection makes it possible to receive terrestrial regional TV channels with the an-
tenna system correspondingly aligned.
By connecting the antenna input socket of the hi-fi system to the radio output of the
Sat socket you can receive terrestrial radio stations.
51