Digital connections, Setting up the system, Dts disclaimer clause – Kenwood VRS-6100 User Manual
Page 11
11
EN
R
L
DIGITAL IN
OPT.
COAXIAL
VIDEO
DVD
Digital connections
The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard
PCM (CD) format digital signals.
If you have connected a DVD player to the receiver with digital connection, be sure to read the "Input mode settings" section carefully.
8
Setting up the system
Connect the video signal and analog audio signals to the VIDEO jacks.
(See "Connecting video components, audio components".
0)
OPTICAL DIGITAL
OUT (AUDIO)
(Optical fiber cord)
Component with DTS,
Dolby Digital, or PCM
OPTICAL DIGITAL OUT
DTS disclaimer clause
When playing DTS-encoded discs, excessive noise will be exhibited from the analog stereo outputs of the CD or DVD player. To enjoy DTS
Digital Surround™ playback, this unit must be connected to the digital output of the CD or DVD player.
CD player
*5484/08-15/EN
04.5.17, 8:34 AM
11