Kenwood VRS-6100 - Manual (Page 23)

23 EN
Normal playback
Adjusting the sound
VOLUME CONTROL
PHONES
MULTI CONTROL @/#
ACTIVE EQ
ACTIVE EQ
VOLUME
MUTE
BASS BOOST
MULTI
CONTROL
%/fi
TONE
LOUDNESS
Adjusting the TONE (PCM stereo and analog stereo mode only)
1 Press the RECEIVER key on the remote control unit to set
it to the receiver control mode.
2 Press the TONE key to select the TONE mode.
3 Use the MULTI CONTROL button (or the MULTI
CONTROL %/fi keys) to select "TONE ON" or "TONE OFF"
TO O E N N
4 When in "TONE ON" selection, press the TONE key for the
following displays.
1 "BASS" :
Select this to adjust the low frequency range.
2 "TREBLE" :
Select this to adjust the high frequency range.
5 Use the MULTI CONTROL button (or the MULTI
CONTROL %/fi keys) to adjust the sound quality.
TR 1 E L B E )
6 Repeat steps 4 and 5 as required.
÷ The bass and treble levels are adjustable from -10 to +10 in
2 step increments.
÷ The adjustment item is displayed for approximately 20 seconds.
7 Press the TONE key again to return to the input indication.
÷ The TONE key is defeated during tone adjustment in the
SOUND mode ( ¤,‹) or when the listen mode is
switched to a mode other than the stereo mode.
One-touch low frequency emphasis (Bass Boost)
(PCM stereo and analog stereo mode only)
You can adjust the sound quality when this model is in the PCM stereo
and analog stereo modes.
1 Press the RECEIVER key on the remote control unit to set
it to the receiver control mode.
2 Press the BASS BOOST key.
÷ Press the key once to select the maximum (+10) low fre-
quency emphasis setting.
÷ TONE mode will automatically be turned ON.
÷ The BASS BOOST key is defeated during tone adjustment in
the SOUND mode ( ¤,‹) or when the listen mode is
switched to a mode other than the stereo mode.
Switching back to the previous setting
Press the BASS BOOST key.
Adjusting the LOUDNESS mode
(PCM stereo and analog stereo mode only)
You can adjust the Loudness function which controls the low volume
settings to maintain the music's richness.
1 Press the RECEIVER key on the remote control unit to set
it to the receiver control mode.
2 Press the LOUDNESS key to turn the LOUDNESS setting
ON.
To cancel
Press the LOUDNESS key again.
ACTIVE EQ mode
You can enjoy a more impressive sound effect when ACTIVE EQ is
turned ON.
Press the ACTIVE EQ key for the following selections:
1 EQ MUSIC : (The "ACTIVE EQ" indicator lights up)
Effective when listening to music.
2 EQ CINEMA : (The "ACTIVE EQ" indicator lights up)
Effective when watching a movie.
3 EQ GAME : (The "ACTIVE EQ" indicator lights up)
Effective when playing a game.
4 EQ OFF : (The "ACTIVE EQ" indicator goes off
The ACTIVE EQ function is turned OFF.
÷ ACTIVE EQ function will not be available when REC MODE,
AUTO TUNING or PRESET MEMORY is ON and during 96kHz
LPCM playback.
Lights up
*5484/16-27/EN 04.5.17, 8:34 AM 23