KORG Electribe EM-1 - Manual (Page 10)

10
2.Front and rear panel ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
1 2 3 4 5
Synth filter section
These controls let you adjust the brightness of the sound or add a distinctive
tonal character.
1. Cutoff
Adjust the cutoff frequency of the filter.
3. Resonance
Adjust the resonance of the filter.
2. EG Int (EG intensity)
Adjust the depth of the filter envelope.
4. Drive
Adjust the degree of distortion for the sound of the filter. Driver makes between warmly
Analog Overdrive and Hard Distortion.
Part Select section
1. (Synth Part) 1, 2 keys
These keys select a synth part
2. (Synth Part) Accent key
This key selects the synth accent part.
3. (Drum Part) 1—4, 5A-5B, 6A-6B keys
These keys select a drum part. By pressing a key, you can
hear the sound that is assigned to the corresponding part.
4. (Drum Part) Accent key
This key selects the drum accent part.
Sequence Control section
1. Rec key
Use this key to record rhythms, phrases and movements
of the knobs etc. If you press this key during recording,
recording will end, and playback will continue.
2. Stop/Cancel key
This key stops playback of a pattern or song, or cancels an operation.
3. Play/Pause key
This key begins/pauses playback of a pattern or song.
4. TAP, Rest/T ie, Part Mute key
Tap on this key to enter a new tempo. During step recording, use this key to input a rest
or a tie. During playback, you can hold down this key and press a Part key to mute the
specified part.
5. Transpose, Solo key
Use this key to transpose a phrase. During playback, you can hold down this key and
press one or more Part keys to playback the specified part(s).
1 2
3 4
1
2
3
4