Kyocera 1650 - Manual (Page 50)

Preparations
2-18
4 Press the Enter key.
Next, set the default gateway.
Registering the Default Gateway
To register the default gateway, continue the procedure from step 4 above.
1 Press the S key or the T key to select Gateway.
2 Press the Enter key.
3 Use the same procedure as steps 14 to 17 of IP
address setting to input the address.
4 Press the Enter key.
5 When you finish making all of the network setting,
press the Reset key. The message display returns to
the printer basic screen.
IP Address
Subnet Mask
TCP/IP Setting
Gateway
Gateway
0 0 . . 0 0 .