Kyocera 1650 - Manual (Page 78)

Basic Operation
3-22
During Output
1 Press the Interrupt key during output. Select
Interrupt mode
is displayed.
Note If the machine has neither print data nor received fax data, Interrupt mode OK [Interrupt
mode
] is displayed. Proceed to step 4.
2 Press the S key or the T key to select the desired
interrupt mode.
Notes •
Priority:Printer
is displayed when the machine has print data.
•
Priority:Fax
is displayed when the machine has received fax data.
3 Press the Enter key.
If you have selected Interrupt copy, Interrupt
mode OK
[Interrupt mode] is displayed. Proceed to
the next step.
If you have selected Priority:Printer or
Priority:Fax
, output of data starts. Proceed to step
5.
4 Set the original for interrupt copying and perform copying.
5 After the interrupt job is complete, press the Interrupt key. The interrupted job resumes.
Select Interrupt mode.
Interrupt copy
Priority:Printer
Priority:Fax