3 basic, Operation, Basic copying procedure -1 – Kyocera 1650 User Manual
Page 57: A shall have no obliga, 3basic operation, Basic copying procedure
Advertising
3-1
3
Basic Operation
This chapter explains the following operations. For other functions, refer to the Advanced
Operation Guide.
•
•
•
•
•
•
•
•
•
•
Basic Copying Procedure
1
Open the main power switch cover located on the right
side of the machine and turn the main power switch on
( | ). At the end of warm-up, the Start indicator lights up
green.
2
Set the original onto the platen. Be sure to set the
original by aligning it with the left rear corner of the
platen along the original size indicator plates.
Note
For the method of setting originals in the optional document processor, see Setting Originals in
the Document Processor on page 4-2.
Advertising