Kyocera FS-600 User Manual
Page 61
Advertising
Chapter 1 Installing the Page Printer
1- 39
Testing Extended Memory
1.
Check that the power switch is off, plug the power cord into the printer, and turn the power on.
2.
Wait for the printer's ON LINE/A4 indicator to light, then press and hold the SHIFT key followed
by the ON LINE/STATUS key briefly.
3.
If installation has been performed properly, a status page will be printed. Check the Memory in
the upper right. Information on the SIMM installed in slot is shown here. There is no problem if
total memory has increased. (The printer is shipped from the factory with 4096 KB [4 MB] of
memory.)
Advertising