Konica Minolta Oxygen Saturation Monitor PULSOX-300i - Manual (Page 23)

21
Ext.Connect
External Connection
The PULSOX-300i has an external output terminal for
outputting measurement data stored in the instrument's
memory to a computer. In addition, when the Data Analyzing
Software is installed on the computer and the PULSOX-300i is
connected to the computer using UA-300, the date and/or Auto-
power-off timer (which cannot be set using only the instrument
itself) can be set. It is also possible to download the measured
data from the instrument's built-in memory to the computer
to analyze the data, display data graphically, save data in
spreadsheet format, or print data out.
● For details regarding the Data Analyzing Software, refer to
the instruction manual and/or online help of the software.
<Connecting the PULSOX-300i and a computer>
UA cable USB cable
UA-300 main unit PULSOX-300i Computer
● For details regarding the connection between the PILSOX-300i
and the computer, refer to the Installation Guide manual of the
software.
● For details regarding the USB Adapter UA-300, refer to the
instruction manual of the UA-300.