Konica Minolta Oxygen Saturation Monitor PULSOX-300i - Manual (Page 3)

1
Foreword
Safety Precautions
To ensure correct use of this instrument, read the following points
carefully and adhere to them. After you have read this manual,
keep it in a safe place where it can be referred to anytime a
question arises.
WARNING
(Failure to adhere to the following points may result in death or serious injury.)
The instrument is designed for measurement of the ox-
ygen saturation (SpO
2
) of arterial blood and the pulse
rate. Do not use it for any other purposes, such as
warning of sleep apnea and breathing abnormalities.
Do not use the instrument in places where flamma-
ble or combustible gases (anesthetic gas etc.) are
present. Doing so may cause a fire.
Do not disassemble or modify the instrument and
accessories. Doing so may cause a fire or electric
shock.
The instrument should not be operated if it is dam-
aged, or smoke or odd smells occur. Doing so may
result in a fire. In such situations, turn OFF the pow-
er immediately, remove the battery, and contact the
nearest authorized service facility.
Do not put the batteries on a fire, short-circuit them,
heat them or disassemble them. Doing so may
cause explosion or heat generation, resulting in fire
or injury.