Konica Minolta IP-411 - Manual (Page 109)

Printer Drivers 3-79
Printer Driver Screens
PCL Driver Screens for Windows 95 Details Tab
Details Screen
The Details tab brings you to a screen that shows the current Port setting in the [Print to the following port]
field. The default setting is LPT1, as shown. To change this setting, click the arrow next to the setting to
view options, then highlight another Port setting, as required.
The Printer Driver in use is indicated in the [Print using the following driver:] field. The Konica 7040 PCL
driver is shown on this screen as the current driver. To change this setting, click the arrow next to the setting
to view driver options, then highlight another driver, as required.
This screen also lets you to change the Timeout settings for capturing files for printing. To print very large
files, you may need to adjust this time-out setting. In most cases, however, you will not need to change this
setting.