Konica Minolta IP-411 - Manual (Page 43)

3-14 Printer Driver Screens
Printer Driver Screens
PostScript Driver Screens for Windows 3.1 Output Bin
Output Bin
1. From the Options screen, use the arrow under Printer features to scroll through the list of available
options.
2 Click on the Output Bin feature.
Output Bin describes which area of the finisher will be used as the output tray. This enables you to control
a special or high volume job you may want to run from one source. The current Output Bin setting is
indicated in Setting for: Output Bin. The default setting is for the middle tray.
3 To change the setting, click the arrow to view further setting options, then select another output tray.
4 When the correct setting is indicated, click OK.
To leave the setting unchanged, click Cancel.