Konica Minolta IP-411 - Manual (Page 85)

Printer Driver Screens 3-55
Printer Driver Screens
PostScript Driver Screens for Windows 95 Device Options Tab
Printer Features - Print Density
The default setting for Print Density is Normal. To change the default setting:
1 Use the arrow in the [Change setting for: Print Density] field to view options.
2 Highlight the desired option, such as, Toner Save mode or Draft mode, then click OK.
• Toner Save uses 80% of the toner amount used in Normal mode.
• Draft mode uses 60% of the toner amount used in Normal mode.
To leave the setting unchanged and exit from the screen, click Cancel.