Konica Minolta IP-411 - Manual (Page 164)

3-134 Printer Drivers
Printer Driver Screens
PS Driver Screens for Windows NT Document Defaults
Advanced - Printer Features (Output Bin)
Highlight Output Bin to display the current default setting. Output Bin describes which area of the finisher
will be used as the output tray. This enables you to control a special or high volume job you may want to
run from one tray source. The default setting uses any appropriate tray that is available.
Notice that the current setting is indicated in the [Change 'Output Bin' Setting] field along with options.
To change the current setting, highlight the desired setting, then click OK.
To leave the current Output Bin setting unchanged, click Cancel.