Kenwood DPX313 - Manual (Page 10)

10 | DPX503U/DPX303/DPX313
Display Settings
Function of DPX503U
Illumination Color Selection
Selecting the Illumination Color of the panel.
1 Enter Illumination Color Selection mode
Select “Color” .
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select the place where you want to set the
Illumination Color
Place Display
All “All Color”
Display “Display Color”
Button “Key Color”
Volume knob “Left Knob Color”
Control konb “Right Knob Color”
Save and recall the Illumination Colors you selected
for each place “Color Preset”
Turn the Control knob and push the center
when the desired item is displayed.
3 Select the Illumination Color
Turn the Control knob and push the center
when the desired item is displayed.
Select the color from “Variable Scan”/ “Color1”
— “Color 10”/ “User”.
Creating “User” color
You can create your original color during the
selection from “Color1” — “Color10.”
The color you created can be called when you
select “User”.
1. Press the Control knob for at least 1 second.
Enter the detail color adjustment mode.
2. Set the color.
Operation type Operation
To select the color to adjust.
(red, green, or blue) Push the Control knob towards
right or left.
To adjust color. (Range: 0 – 9) Turn the Control knob or push it
towards up or down.
3. Press the Control knob.
Exit the detail color adjustment mode.
4 Exit Key Color Selection mode
Press the [FNC] button.
⁄
• When you select “PRESET”, you can save the combination
of the Illumination Colors selected for each place. For
how to save Illumination Colors, refer to <Illumination
Color Preset Memory> (page 10).
Function of DPX503U
Illumination Color Preset Memory
Saving the combination of the Illumination Colors
selected for each place. The memory cannot be
erased by the Reset button.
1 Set the Illumination Color for each place
Refer to <Illumination Color Selection> (page 10).
2 Enter Illumination Color Preset Memory mode
Select “COLOR” > “PRESET” > “MEMO”.
For how to select Function Control item, refer to
<Function Control> (page 6).
3 Put the Illumination Color Preset in the
memory
Press the Control knob.
“Memory?” is displayed.
4 Turn the Control knob to select “YES”, and then
press the Control knob.
“Memory Completed” is displayed.
5 Exit Illumination Color Preset mode
Press the [FNC] button.
⁄
• Register 1 pair of Illumination Color Preset Memory.
• If you press the Reset button, the value in the memory
will be default setting value of “Illumination Color
Selection.”