Kenwood DPX313 - Manual (Page 11)

English | 11
Disc Naming (DNPS)
Attaching a title to a CD.
1 Play the disc you want to attach a name to
2 Select Name set mode item during Menu
mode
Select the “Name Set” display.
For how to select Function Control items, refer to
<Function Control> (page 6).
3 Enter Name set mode
Press the Control knob for at least 1 second.
4 Enter the name
Operation type Operation
Move the cursor to the enter
character position Push the Control knob towards right
or left.
Select the character type* Press the Control knob.
Select the characters Turn the Control knob or push it
towards up or down.
* Each time you press the knob, the character type
alternates between the types shown in the table below.
Character type Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
⁄
• Enter characters by using a remote control with numbers
buttons.
Example: If you are entering “DANCE”.
Character “D” “A” “N” “C” “E”
Button [3] [ ¢ ] [2] [ ¢ ] [6] [ ¢ ] [2] [ ¢ ] [3]
Times pressed 1 1 2 3 2
5 Exit Menu mode
Press the [FNC] button.
⁄
• A title cannot be attached to Audio file media.
• When operation stops for 10 seconds the name at that
time is registered, and Name Set mode closes.
• Media that you can attach a name to
- Internal CD player: 10 discs
- External CD changer/ player: Varies according to the
CD changer/ player. Refer to the CD changer/ player
manual.
• You can change the name of a CD by the same
operation you used to name it.
Function of DPX503U
Illumination Color Preset Recall
Recalling the selection you saved in Illumination
Color Preset mode.
1 Enter Audio Preset Recall mode
Select “COLOR” > “PRESET” > “RECALL”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Recall the Illumination Color Preset
Press the Control knob.
“Recall?” is displayed.
3 Turn the Control knob to select “YES”, and then
press the Control knob.
“Recall Completed” is displayed.
4 Exit Illumination Color Preset Recall mode
Press the [FNC] button.
⁄
• When you recall Illumination Color Preset, the current
Illumination Color settings will be replaced with the
preset selection.