Kenwood DPX313 - Manual (Page 28)

28 | DPX503U/DPX303/DPX313
• News (News Bulletin with Timeout Setting)
Automatically receives news bulletin when it
starts. Set the time during which interrupt is to be
disabled after start of another news bulletin.
Changing “News 00min” to “News 90min” turns this
function ON.
If news bulletin starts when this function is ON,
“Traffic INFO” is displayed and news is received. If
“20min” is has been set, reception of another news
bulletin will not start for 20 minutes.
The news bulletin volume is the same level that
was set for Traffic Information.
• Seek Mode (Tuning mode select)
Select a tuning mode of the radio.
Tuning mode Display Operation
Auto seek “Auto1” Automatic search for a station.
Preset station seek “Auto2” Search in order of the stations in the
Preset memory.
Manual “Manual” Normal manual tuning control.
• AF (Alternative Frequency)
When the reception is poor, automatically alternate
to another frequency broadcasting the same
program in the same RDS network with better
reception.
• Russian (Russian language setting)
When this is set to ON, the following character
strings are displayed in Russian:
Folder name/ File name/ Song title/ Artist name/
Album name/ KCA-BT100 (optional accessory)
• Power OFF (Power OFF Timer)
Setting the timer to turn this unit’s power OFF
automatically when Standby mode continues.
Using this setting can save the vehicle’s battery
power.
– – –: Power OFF Timer function is OFF.
20min: Turns the power OFF after 20 minutes.
(Factory setting)
40min: Turns the power OFF after 40 minutes.
60min: Turns the power OFF after 60 minutes.
• CD
Read
Sets the method for reading CD.
When unable to play special format CD, set this
function to “2” to force playing. Note that some
music CD may be unplayable even when set to “2”.
In addition, audio files cannot be played when set
to “2”. Normally, keep this set to “1”.
1 : Automatically distinguishes between audio file
disc and music CD when playing disc.
2 : Forces playing as music CD.
• DISP REVERSE
Switches the panel display between positive
or negative. In addition, you can reverse it in
conjunction with the interior light.
POSI 1 : Displays the text in the positive.
POSI 2 : When the interior light is off, the text is
displayed in the positive; when the interior
light is on, the text is displayed in the
negative.
NEGA 1 : Displays the text in the negative.
NEGA 2 : When the interior light is off, the text
is displayed in the negative; when the
interior light is on, the text is displayed in
the positive.
• Cabin
The position of front and rear speakers may not
have the same distance from the center of the
vehicle interior.
For example, when a car type has the front speaker
nearer to the center of the vehicle interior than the
rear speaker, you hear a delayed sound from the
rear speaker.
This function allows the sound of the nearer
speaker to the center of the vehicle interior to be
output with delays and compensates the sound
arrival time from the front and rear speakers to be
heard at the same time.
The sound arrival time can be compensated simply
by selecting the car type you want to use, because
the compensation values for typical cars have been
preset.
You can specify the more suitable compensation
values for your vehicle by using <DTA> (page 19)
function.
You can also compensate the listening positions
(such as front and rear) in accordance with scenes
by specifying the positions at <Preset position
selection> (page 20).
Appendix