Kenwood DPX313 User Manual
Page 7
English
|
7
Category Item
Setting
Entry Setting overview
Condition Page
“Russian”*
3
“OFF”/ “ON”*
Selects Russian as the display language.
28
“Scroll”
“Auto”/ “Manual”*
When set to “Auto”, scrolls the screen once with the change
of the displayed text.
—
“Built in AUX”
“OFF”/ “ON”*
Sets whether to display AUX during source selection.
“Power OFF”
“-----”/ “20min”*/
“40min”/ “60min”
Turns off the power when the preset time has lapsed in the
Standby mode.
28
“CD Read”
“1”*/ “2”
Sets the CD read mode.
28
“Audio Preset”
*
2
1 sec.
Presets the setting value of the audio control. The preset
value is retained after resetting.
24
“DISP REVERSE”
“POSI 1”/ “POSI 2”/
“NEGA 1”*/ “NEGA 2”
Switches the panel display between positive or negative.
—
“CONTRAST”
“1” – “10”
Adjusting the display contrast.
—
“OPENING MSGE
Edit”
1 sec.
Sets the opening message displayed when the power is
turned on.
12
“DEMO Mode”
“OFF”/ “ON”*
2 sec.
Specifies whether to enable demonstration.
—
18
SOUND*
1
“S-SET” “CABIN” “Compact1” etc.
Selects the car type to compensate the distance difference
between each speaker.
19
/28
“DTA”
Makes fine adjustment of the compensation value specified
at Cabin.
19/29
“XOVER”
Makes fine adjustment of the X’Over value specified at
Speaker.
20
“S-CTRL” “EQ”
Sets the sound quality.
20
“POSIT”
Compensates the sound environment in accordance with
the listening position.
20
/21
“LOUD” “OFF”*/ “ON”
Compensates high and low pitch sound at lower volume.
“PRESET”
Presets the setting value of the audio control. The preset
value is retained after resetting.
21
DISP
“TYPE”
A/ B/ C/ D
Sets the display pattern.
—
9
“GRAPH”
Spectrum Analyzer 1 – 2
Sets the Type D spectrum analyzer display.
Î
“SIDE”
Text icon/ Source
icon/ OFF
Sets the Type A/B side icon display.
Åı
“TEXT”
Sets the text display.
ÅıÇ
9
“OUT”
Sets the vehicle-side display.
—
Color*
1
Sets the Panel illumination color.
10
P.MEM
Presets a station.
15
SCAN
“ON”/ —
When set to “ON”, plays the intro of the music in the folder
successively.
RDM
“ON”/ —
When set to “ON”, plays the music in the folder randomly.
FiREP
“ON”/ —
When set to “ON”, plays the music repeatedly.
FoREP
“ON”/ —
When set to “ON”, plays the music in the folder repeatedly.
SCAN
“ON”/ —
When set to “ON”, plays the intro of the music on the disc
successively.
RDM
“ON”/ —
When set to “ON”, plays the music on the disc randomly.
M.RDM
“ON”/ —
When set to “ON”, plays the music in the disc changer
randomly.
T.REP
“ON”/ —
When set to “ON”, plays the music repeatedly.
D.REP
“ON”/ —
When set to “ON”, plays the music on the disc repeatedly.
Next page
3
*Factory setting
*1 Function of DPX503U.
*2 Function of DPX303/DPX313.
*3 Function of Russian sales model.