Kenwood KOS-A300 - Manual (Page 26)

26 | KOS-A300
Bluetooth Setup
Function of KCA-BT200 (Optional Accessory)
Setting a Voice Command for
Category
Add a voice tag to the phone number category
(type) for voice calling.
1 Select Phone Number type edit mode
Select “BT” > “Voice Tag” > “PN Type Edit”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Enter Phone Number type edit mode
Press the Control knob.
3 Select the category (type) you wish to set
Turn the Control knob and push the center
when the desired category name is displayed.
“General”/ “Home”/ “Office”/ “Mobile”/ “Other”
4 Select a mode
Turn the Control knob.
Display Operation
“PN Type Regist” Register a voice tag.
“PN Type Check” Play a voice tag.
“PN Type Delete” Delete a voice tag.
“Return” Return to step 2.
5 Register the category (type) by performing
steps 5 to 7 in <Adding a voice dialing
command> (page 26).
6 Exit Phone Number type edit mode
Press the [FNC] button.
⁄
• Set the voice tag for all the 5 categories. If the voice tag
is not registered for all the categories, the Phonebook
may not be recalled by voice command.
Adding a voice dialing command
Add a voice tag to the phonebook for voice dialing.
You can register up to 35 voice tags.
1 Select Phonebook name edit mode
Select “BT” > “Voice Tag” > “PB Name Edit”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Enter Phonebook name edit mode
Press the Control knob.
3 Search for the name to register
Select the name to register with reference to 4 in
<Calling a number in the Phone Book> (page 20).
If a voice tag has already been registered for a
name, “*” is displayed before the name.
4 Select a mode
Turn the Control knob.
Display Operation
“PB Name Regist” Register a voice tag.
“PB Name Check”* Play a voice tag.
“PB Name Delete”* Delete a voice tag.
“Return” Return to step 2.
* Displayed only when a name for which a voice tag has
been registered is selected.
Select “PB Name Regist” (Regist)
5 Register a voice tag (first)
Press the Control knob.
“Enter Voice 1” is displayed.
When a beep is heard, speak a voice tag within 2
seconds.
6 Confirm the voice tag (second)
Press the Control knob.
“Enter Voice 2” is displayed.
When a beep is heard, speak the same voice tag
that was spoken in step 5 within 2 seconds.
“Completed” is displayed.
7 End registration
Press the Control knob.
Return to step 2. You can register another voice tag
continuously.
⁄
• If your voice cannot be recognized, a message is
displayed. Refer to <Troubleshooting Guide> (page 40).
Pressing the Control knob allows you to retry voice input.
Select “PB Name Check” (Play)
5 Press the Control knob.
Play the registered voice and return to step 2.
Select “PB Name Delete” (Delete)
5 Delete a voice tag
Press the Control knob.
6 Turn the Control knob to select “YES”, and then
press the Control knob.
“Delete” is displayed.
Exit Phonebook name edit mode
Press the [FNC] button.
⁄
• Audio sound is not output during voice tag registration.