Kenwood KOS-A300 - Manual (Page 5)

English | 5
Illumination Control: [ ]
Hold this button and turn the Control knob to change
the display and controller illumination colors.
You can select from the 10 colors or to scan all 10
colors, each of which changes every 5 seconds.
⁄
• To make the display illumination color different from the
controller, set “OFF” “MENU” > “Illumi SYNC” of <Function
Control> (page 6). You can set the display illumination color
in “SETUP”
> “Color Select” (page 9) of <Function Control>
(page 6).
• Switching “Illumi SYNC” from “OFF” to “ON”, does not
synchronize illumination color immediately. The next
illumination color change action activates the color
synchronize.
iPod, Zune and USB device functions
Pause and play: Control knob
Switches between pause and play each time this
button is pressed.
Music search (Function of iPod/USB device):
Control knob
Pushing left or right on the control knob forwards or
reverses the music. Holding the control knob to the
left or right fast-forwards or fast-reverses (inaudible).
Folder search (Function of iPod/USB device):
Control knob
Changes the folder containing the audio file when
pushing toward up or down.
⁄
• For the operation on iPod, see <Music Search for
iPod>(page 12) for quick search and control functions.
Search mode: Control knob
After turning control knob, you can quickly search
songs with the Control knob. See <Music Search>
(page 12) for details.
USB device removing
When removing the iPod/ Zune/ USB device, you
must enter the Remove mode. To enter the Remove
mode, press the [FNC] button and then select “RMV”.
For details, refer to <Function Control> (page 6).
⁄
• The iPod/ Zune/ USB device can be removed during power
off.
C C C Ca Ca Ca Ca Ca nc nc l l l el t t t h h h he D D D emon t t stra i ti ti ti on m d d d od e
D D D Do not use this unit before canceling
D D D Demonstration mode.
1 1 1 1 Turn the power ON
Press the [SRC] button.
2 2 2 2 Enter Function Control mode
Press the [FNC] button.
3 3 3 3 Select the “DEMO Mode” display
Turn the Control knob.
4 4 4 4 4 Set the Demonstration mode
Press the Control knob for at least 2
seconds.
Pressing this knob for 2 seconds or longer
toggles the setting between “ON” and “OFF”.
5 5 5 5 Exit Function Control mode
Press the [FNC] button twice.
L L L L Listen to the audio via this unit
Switch the source of the vehicle audio to
“AUX”.