Kenwood KOS-A300 - Manual (Page 38)

38 | KOS-A300
Installation of Display unit
— Display Stand Used —
1 Install the display bracket (Accessory #) to the
display stand (Accessory $).
Accessory&
Accessory^
Accessory*
(Ø3 x 8)
2 Install the display unit to the display bracket
(Accessory #).
Accessory*
(Ø3 x 8)
Release coated paper
Screw hole
Display
3 Remove the coated paper from the display stand
(Accessory $), and paste it on the mounting
surface.
Install the display unit using the screw holes
illustrated above when it cannot be secured firmly
using the double-sided tape.
Installation
Installation of Display Unit
— Frame Used —
1 Using the display template (Accessory %), drill a
hole on the display installation position.
2 Install the display frame (Accessory ^) to the
installation hole made in step 1.
3 Install the display unit to the display frame
(Accessory ^).
Accessory(
Display
⁄
• Use Removal tool (Accessory &) when you remove the
display unit from the display frame (Accessory ^).
Accessory)