Konica Minolta CF5001 - Manual (Page 14)

SAFETY AND IMPORTANT WARNING ITEMS
S-9
3. MEASURES TO TAKE IN CASE OF AN ACCIDENT
• If an accident has occurred, the distributor who has been notified first must immediately take emergency
measures to provide relief to affected persons and to prevent further damage.
• If a report of a serious accident has been received from a customer, an on-site evaluation must be carried
out quickly and Minolta Corporation must be notified.
• To determine the cause of the accident, conditions and materials must be recorded through direct on-site
checks, in accordance with instructions issued by Minolta Corporation.
• For reports and measures concerning serious accidents, follow the regulations given in “Serious Accident
Report/Follow-up Procedures”.
4. CONCLUSION
• Safety of users and customer engineers depends highly on accurate maintenance and administration.
Therefore, safety can be maintained by the appropriate daily service work conducted by the customer
engineer.
• When performing service, each copier on the site must be tested for safety. The customer engineer must
verify the safety of parts and ensure appropriate management of the equipment.
• Do not replace the cover or turn the copier ON before any solvent remnants
on the cleaned parts have fully evaporated.
A risk of fire exists.
• Use only a small amount of cleaner at a time and take care not to spill any
liquid. If this happens, immediately wipe it off.
A risk of fire exists.
• When using any solvent, ventilate the room well.
Breathing large quantities of organic solvents can lead to discomfort.
DANGER : HANDLING OF SERVICE MATERIALS