Konica Minolta CF5001 - Manual (Page 81)

TRANSFER BELT UNIT CF5001 Ver.1.0 Sep. 2003
2-28
II UNIT EXPLANA
TION
5. TRANSFER BELT UNIT
5.1 Composition
Symbol Name Function or method
[1] 1st transfer roller /Y Transfer of images from the drum /Y to the transfer belt (1st trans-
fer)
Roller transfer method with constant current DC bias applied
DC output range by the constant current method: 5 to 50 µA
[2] 1st transfer roller /M Transfer of images from the drum /M to the transfer belt (1st trans-
fer)
Roller transfer method with constant current DC bias applied
DC output range by the constant current method: 5 to 50 µA
[3] 1st transfer roller /C Transfer of images from the drum /C to the transfer belt (1st trans-
fer)
Roller transfer method with constant current DC bias applied
DC output range by the constant current method: 5 to 50 µA
[4] 1st transfer roller /K Transfer of images from the drum /K to the transfer belt (1st trans-
fer)
Roller transfer method with constant current DC bias applied
DC output range by the constant current method: 5 to 50 µA
[5] Transfer belt Image creation for paper transfer
Semiconductor polyimide film
[6] Separation claw unit Paper separation assist from the transfer belt
Pressure/release method by the transfer belt separation claw sole-
noid (SD1)
[7] Belt cleaning unit Cleaning and collection of toner on the transfer belt
[8] Belt cleaning blade Cleaning of the transfer belt
Transfer belt contact/separation method
8050ma2015
[1]
[2]
[11]
[6]
[12]
[13]
[10]
[7]
[9]
[8]
[3]
[5] [4] [14] [5] [6]
M18
M19
HV2
SD1
PS69
PS68
PS15
C REG/1
C REG/2
DRIVE
CLOCK
CW
LD
H/L
DRIVE
A
A
B
B
PRCB