Kathrein MSK 33 - Manual (Page 26)

Sat Operation
26
Setting of the LNB voltage supply:
Activate the supply voltage for vertical
polarisation 14.0 V in the LNB-CONTROL
menu. In the upper display field, the
supply voltage (14.0 V) and the current
draw of the LNB (181 mA) are displayed.
Press the BACK button to open the Sat
menu once more.
Selecting the LO frequency
Press the LNB-CONTROL button in the Sat menu. With the button LO, you can
request nine preset LO frequencies. Set LO1 (09750) in the field. With the BACK
button, open the Sat menu again.
Entering the transponder frequency:
Press the button sat frq and enter the
transponder frequency 11299 MHz with
the numerical buttons. Confirm the entry
with the MHz button. You will now see the
frequency and level in the lower display
field.
LNB control menu
SAT menu
<>sat
frq
LNB
CONTROL
SAT
MEASURE
BACK
analog
digit
DVBS
off
22kHz
14.0V
on >
18.0V
off>
09750
Lo 1>
DiSEqC
VSEC
LNB: U= 14,0V I=181mA
BACK