Kathrein MSK 33 - Manual (Page 37)

Sat Operation
37
Initial ANALOG-menu
With this softkey, the Sat
menu is called up.
Calling up the sound subcarrier
menu
Level-dependent acoustic signal
In the function, level
beep,“ an acoustical
signal is produced,
whose pitch is
proportional to the
received signal level. With it, it is possible to optimally align the receiving antenna
to a transmitter.
In this menu, the receiving frequency can be changed using the cursor buttons,
◄►.
Level measurement ANALOGUE
Calling up the level measurement ANALOGUE as well as minimal and maxi-
mal level measurement.
You can now measure the level of the analogue satellite signals. As long as this
measurement function is called up, the MSK 33 measures the minimal and maxi-
mal level. This measurement function serves for monitoring the check points for
level fluctuations. Even after exiting the menu, the MSK 33 stays set on ANA-
LOGUE reception.
The following display appears on the screen, when the button
„measure“ is pressed: Display of the minimal level 78.0 dbµV and
maximal level 82.5 dBµV.
Display Sat frequency, analogue reception „A“ and level.
Both arrows in front of the transponder frequency display simpli-
fies the precise tuning to the middle frequency.
An „A“ in front of the level display means, that the MSK 33 is set to analogue
reception. Even after the menu is closed, the MSK 33 remains set to ANA-
LOGUE reception.
For level measurement for digital satellite signals, the MSK can be switched over to
the digital menu, refer to the respective section.
Calls up the second submenu ANALOGUE.
SUBCAR
mea-
sure
MORE
---SAT MEASURE ALL---
min/max 55.5/56.0dbµV
level
beep
------------- 70
><11208.00MHz A56.0dBµV