Kyocera Laser Printing ELP - Manual (Page 10)

Enhanced Laser Printing
User manual
Read page counters and display printer status
ELP can be setup in a way, that only the archive functionality is displayed. Is this
the case, please skip this chapter.
The install tab contains beside
the ELP activation
functionality, the possibility to
read back printer informations
from one or all printers, if the
printer port is a valid TCP/IP
adress.
1. The configure button starts
the default WEB browser
and accesses the printers
WEB pages. Now the
printer is ready to be
configured.
2. the Print Jobs button dis-
plays all currently queued
jobs and you have the
possibility to pause, delete or copy and
move them to other queues. This
function is described later in this
manual
3. The Evalute button reads back the
marked printer informations like page
counters, firmwares etc.
4. And finally the ReadAll button reads
back all page counters from network
connected printers, either of all installed
printers or even within certain ranges of
TCP/IP addresses.
This functionaliy is also accessable via
the Admin register.
For further information see chapter
“Collect Page Counter ..” pretty at the
end of this manual.
www.stethos.com - 10 -