Kyocera Laser Printing ELP - Manual (Page 11)

Enhanced Laser Printing
User manual
Change License Key
ELP can be setup in a way, that only the archive functionality is displayed. Is this
the case, please skip this chapter.
On the License Tab the actual
license key, the local machine name
and if the key is valid, the amount of
licensed printers and the Module list
are shown.
To change a key, enter the new
value and click on apply.
Note: The key won’t be checked if
it is valid. If an invalid key was
entered, printing on a welpprint
configured printer will not be
possible. A message box will inform
about that.
The contact address and the actual
version are shown when the About
button is clicked.
- 11 - www.stethos.com