Konica Minolta NC-6 - Manual (Page 11)

2 Getting Ready
2-4 NC-6
For Windows 2000
LPR Printing
● You can connect a copier and computer via the LPR Print Service.
● The LPR Print Service is available with a standard installation of the
operating system.
● The TCP/IP protocol is used.
IPP Printing
● You can connect a copier and computer via the IPP Print Service.
● The IPP Print Service is available with a standard installation of the
operating system.
● HTTP (Hyper Text Transfer Protocol), which is part of the TCP/IP
protocol is used. Businesses and organizations may have a firewall
set up to prevent unauthorized access, however, it should normally be
possible to traverse an HTTP firewall. This allows you to print to
network printers beyond the firewall via an IPP connection.
Printing to Port 9100
● You can connect a copier and computer via the Port 9100 Print
Service.
● The Port 9100 Print Service is available with a standard installation of
the operating system.
● The TCP/IP protocol is used.
Windows 2000
TCP/IP protocol
■ LPR
■ IPP
■ PORT9100