Konica Minolta NC-6 - Manual (Page 44)

Using PageScope Light 8
NC-6 8-3
8.2 System Requirements
PageScope Light can be used in the following system environments.
8.3 Accessing PageScope Light
PageScope Light is accessed directly using a Web browser.
1 Start up your Web browser.
2 Enter the IP address of the copier into the URL box, and then press
the [Enter] key.
http://<copier_IP_address>/
❍ (Example) If the copier IP address is 192.168.0.10, enter:
http://192.168.0.10/
3 The PageScope Light screen appears.
✎
Note
In order to access PageScope Light, an IP address must be assigned
to the copier.
8.4 Using PageScope Light
PageScope Light is used in the same way as other Internet Web pages.
Click on links in the page to jump to that page, and use the [Back] and
[Next] buttons to navigate through pages that have already been loaded.
OS Windows 95 (OSR 2.5), Windows 98,
Windows 98 SE, Windows ME, Windows NT
4.0, Windows 2000, or Windows XP
Browser Microsoft Internet Explorer 4.0 or later
Netscape Navigator 4 or later