Creating an ndps printer agent – Konica Minolta NC-6 User Manual
Page 39
7
Connecting the Computer and Copier
7-12
NC-6
Setting Up NetWare 5.x/ 6 Novell Distributed Print Service (NDPS)
✎
Note
Before specifying the NDPS settings, create the NDPS Broker and
NDPS Manager and check that they are loaded.
Check that the NetWare server is set to use the TCP/IP protocol.
Specify the IP address for the controller and check that it has started.
Creating an NDPS Printer Agent
1
Log in with administrator privileges.
2
Start up NWadmin.
3
Right-click the name of the organization or department container
where you want to create the Printer Agent, and then select
NDPS
Printer
.
4
In the
NDPS Printer Name
field, input the printer name.
5
In the
Printer Agent Source
field, select
Create New Printer Agent
,
and then click [Create].
6
Check the printer agent name, and then browse for the NDPS
Manager in the
NDPS Manager Name
field.
7
Under Gateway Types, select
Novell Printer Gateway
.
8
On the Novell DPS Settings window, select
((None))
for the printer and
Novell Port Handler
for the port handler.
9
On the Connection Type window, select
Remote Printer LPR/TCPIP
.
10
Input the IP address assigned to the control as the host address and
“Print” for the printer name, and then click [Finish].
11
On the printer driver registration screen that appears, select
None
for
each operating system, and then finalize the registration.
✎
Note
For information about configuring settings for printer user privileges,
printer alert options, and queue allocation, refer to the NetWare
documentation.