Konica Minolta FRS-1000 - Manual (Page 11)

11
and hold Button for more than 1 second to lock or unlock keypad functions,
except PTT and Monitor (L/MON). When the keypad is locked, the ( )
icon will appear in the upper right corner of the display.
FRS Operation
Channel Selection
In order to communicate with other FRS units, both transmitting and re-
ceiving party must be on the same frequency.
The FRS-1000 has 14 channels (frequencies 1-14) indicated by the large
digits on the LCD display panel. Communication with Audiovox FRS and
compatible units is possible on these 14 channels. Before transmitting on
the selected channel, press the Monitor (L/MON) Button (2) to check the
activity on that channel. If there is activity on the selected channel, change
to another channel that is clear.
To change the FRS channel,
- From FRS standby mode, press the MODE button (11) until the chan-
nel number flashes.
- Press the Up Button ( ) briefly to move to the next higher main
channel number.
- Press the Down Button ( ) briefly to move to the next lower main
channel number.
Continuous Tone Coded Squelch System (CTCSS) Mode (Sub-
Channel) Selection
The Coded Tone Controlled Squelch System (CTCSS) consists of 38 Sub-Fre-
quencies. This feature allows you to utilize the coded squelch tones (01-38)
within each main channel (1-14). This enables you to communicate with
another party on the same main channel using the same subcode. The