Konica Minolta FRS-1000 - Manual (Page 6)

6
The following guidelines will improve performance and provide longer
operating times for the FRS-1000:
1. Do not mix old and new batteries.
2. Do not mix alkaline, standard (carbon-zinc) or rechargeable
(Ni-MH)batteries.
3. If the unit is not to be used for an extended period of time, remove the
batteries. Old or leaking batteries can cause damage to the unit and will
void the warranty.
Charging FRS-1000 Batteries P/N FRSRBAT:
The rechargeable batteries, Part Number FRSRBAT, supplied with the
unit, are charged by connecting the AC Adapter plug to the DC12V jack on
the top of the unit, and setting the CHARGE switch to the ON position. Use
only the AC Wall Adapter, Part Number FRS1-AD, that is supplied with the
base unit. The CHG. LED indicator below the LCD display lights
red during
battery charge operation.
BATTERY
INSTALLATION
POLARITY +
+
-
-
BATTERY
COMPARTMENT
COVER
BATTERY
COMPARTMENT
COVER ARROW