Konica Minolta FRS-1000 - Manual (Page 7)

The battery charge indicator icon displays the battery charge level when the
AC adpter is unplugged. When the AC adapter is connected and in use, the
indicator icon will indicate a full charge as shown below.
Full Battery - three segments are illuminated.
Low Battery - one segment is illuminated.
Approximately 20–24 hours are required to fully charge the batteries. The
red LED charging indicator (14) will light whenever the batteries are
charging. A flashing red LED charging indicator denotes batteries are not
installed. You must set the CHARGE switch to the OFF position, when
using any batteries other than the ones provided. Failure to do this may
cause damage to batteries resulting in personal injury and/or damage to
the unit.
Caution: The charging adapter is intended for use with the supplied
rechargeable Ni-MH batteries Part Number FRSRBAT. Do not
attempt to recharge any other type batteries.
7
CHARGE
ON/OFF
SWITCH
AC
ADAPTER
ADAPTER
PLUG
BASE
UNIT
DC12V
JACK