Konica Minolta FRS-1000 - Manual (Page 14)

14
When the key tone feature is on, the Bell icon appears steady on the
display, and the beep tones sound in response to each button activation.
Roger Beep Tone
The Roger Beep is a tone which is automatically transmitted whenever the
PTT button is released . This tone alerts the receiving party that the trans-
mission has been terminated intentionally.
To enable and disable the Roger Beep tone:
- From the FRS standby mode, press the Mode Button 6 times until rb
appears on the display with the flashing Roger Beep icon ( ) and On
or oF.
- Press the Up or Down Button to select the tone on or off as desired.
- Momentarily press the Power On/Off Button to confirm selection.
When enabled, the tone icon ( ) appears steady on the display.
Call Ringer Selection Mode
The transceiver provides 5 user-selectable call ringer melodies to alert you
to an incoming call.
To select your favorite call ringer melody:
- From the FRS standby mode, press the MODE button 7 times; CA will
appear on the display, together with a flashing number between 1 and
5, and an appropriate call ring.
- Press the Up or Down Button to preview and hear the 5 available call
melodies.
- Momentarily press the Power On/Off button to confirm your selection.
VOX Selection Mode
This option enables you to have hands-free conversation. Your voice or
other relatively loud noises are detected and the radio transmits without
the need to press the PTT button. To set radio for VOX operation,