Kyocera FS-820 - Manual (Page 7)

Windows XP and Vista - Express Installation Installation
User Guide 1-2
Note: KPrint installs a client port monitor that enables Windows TCP/IP printing to
any network card connected to Kyocera printing systems. KPrint supports LPR and
IPP printing. For the KPrint Installation instructions, refer to your CD. KPrint is now
a standalone installer.
Express Installation
Express mode is for a Universal Serial Bus (USB) or network connection only. The
installer can find the printer if it is turned on and connected by USB or network cable.
For the simple, default installation, select Express Mode Installation. In the Custom
method you are able to choose which software packages to install and specify the
port. To use the Custom method, see
Custom Installation on page 1-2.
Windows XP and Vista - Express Installation
In Windows Vista the installation dialog boxes have a slightly different appearance,
but the steps are the same.
1 For the simple, default connection select Express Mode and then click Next. 1
After you select Express Mode and click Next, Discover Printing System opens
and looks for your printer. If Discovery does not find your printing system, ensure that
it is properly connected by USB or network cable and that it is turned on, and then
retry Discovery.
2 At the Discover Printing System page, select the printing system you would like to
install and click Next.
2
Note: If the Found New Hardware Wizard appears, click Cancel. If the Hardware
Installation warning dialog box appears, click Continue Anyway.
3 In Printer Settings you can assign a name to the printing system. This is the name
that appears in Windows Printers and Faxes and in the printer lists in applications.
You can also choose to share this printer with others or set this printer as the default
printer. Make your selection from the following choices, and then click Next.
3
• Share your printers with others
• Set the printer system as the default
4 In the Confirm Settings page, click Install if the settings are correct. Click Cancel
to correct the settings.
4
5 The Printer Installed Successfully screen appears. Click Finish to exit the Printer
Installation Wizard and return to the CD-ROM main menu.
5
The installation of the printer is now complete. If prompted, restart your system.
Custom Installation
When using the Custom method you can specify the printer port and choose which
software packages to install. For example, if you do not want to overwrite your
existing fonts, choose the Custom mode and then clear Fonts in the Custom
Installation page (shown in
step 2 on page 1-4).