Recharging battery/ connecting a pc – Kenwood HC MGR-A7 User Manual

Page 13

Advertising
background image

English

13

Recharging from a PC connected with USB connection

This unit can be connected to a PC with USB connection in order to transfer music with

the PC or recharge the battery from the PC.

Recharging is complete when the CHARGE indicator is extinguished.

Recharging completes in about 3.5 hours.

When the USB cable is connected, this unit enter the data transfer mode and does not

accept user operations on it.

For how to disconnect the PC from this unit, see <Disconnecting this unit from the PC>

below.

USB cable
(provided accessory)

• For the PC system requirements, see <Specifications> (page 47).

• Start up the PC before connecting this unit.

• This unit is switched ON automatically at the moment it is connected to the PC.

• When the USB connection, always use a supplied USB cable.

• This unit should be connected directly to the USB port of the PC. We cannot guarantee the

operation if this unit is connected via a USB hub.

Disconnecting this unit from the PC

1

Click the [Safe To Remove Hardware] icon.

Display the indicator on the task tray if it is
not displayed.

Windows Vista

Windows XP

2

Click [Safely remove USB Mass Storage Device].

(Vista)

(XP)

When the message showing that this unit
can be disconnected safely, disconnect
it from the PC.

Recharging Battery/ Connecting a PC

This unit incorporates a rechargeable battery (hereafter referred to as "the battery"),

which can be recharged from the AC adapter or from a PC connected through USB

connection.

Recharging from the AC adapter

Connect the provided AC adapter to this unit.

Recharging is complete when the CHARGE indicator is extinguished.

Recharging completes in about 3 hours.

This unit can be used in playback and recording even when the AC adapter is connected.

Power cord
(provided accessory)

AC adaptor
(provided accessory)

To wall AC outlet

¤

Caution

÷ Use the enclosed AC adaptor (AC-050150A) for this product. To prevent a fire or

electric shock hazard, do not use an AC adapter other than the one specified.

÷ The power of this equipment will not be completely cut off from the wall outlet when

the power switch is turned off. Install the equipment so that the wall outlet is easily
accessible and, in case of emergency, immediately unplug the power cord from the
wall outlet.

Recharging and battery indication

During recharging, the CHARGE indicator shows the recharging status. During playback

and recording, the on-screen icons show the battery condition.

CHARGE indicator

ON

The indicator lights during recharging.

OFF

The indicator is extinguished when recharging completes.

On-screen icons

Shows the remaining power of the battery.

The battery is nearly exhausted.

• The on-screen icons are not displayed during recharging.

Advertising
This manual is related to the following products: