Kenwood HC MGR-A7 - Manual (Page 5)

English 5
Safety precautions
Note on the built-in battery
• For the replacement of the built-in battery, contact your dealer.
• The battery built into this unit discharges spontaneously even when this unit is not used.
This means that the built-in battery may be exhausted completely when this unit is left
unused for a long period. If this happens, recharge the battery before using this unit.
• The battery recharging time is variable depending on the condition of the battery and
ambient temperature.
• The available playback time reduces when this unit is used under low temperatures.
• The built-in battery can be recharged for about 500 times. (This is a reference value and is
not guaranteed.)
• The built-in battery is a consumable part, and the available playback time reduces
gradually after repeated use. If the available playback time becomes very short even after
the battery has been recharged fully, the battery may be degraded; replace it with new
one.
• Kenwood will not assume any liabilities for the alteration or loss of data caused due to
complete discharging of the built-in battery.
• The built-in battery is a lithium ion battery.
It is free from the memory eff ect of Ni-Cd and nickel-hydrogen batteries, with which the
capacity decreases if the battery is charged or discharged incompletely for several times.
The built-in battery therefore accepts additional charging before it has exhausted
completely.
Storage and maintenance of SD card
Before storage
• Be sure to put the SD card in the case before storing it.
• Do not leave the SD card in a place with extremely high temperature (under direct
sunlight, etc.) or extremely high humidity.
When the SD card gets dirty
• Wipe lightly with a soft cloth, etc.
• Do not use lacquer thinner, benzine or alcohol.
Other cautions
• Do not open or modify the SD card.
• Do not peel off the label from the SD card.
• Do not attach a label or sticker on the SD card.
• Do not touch the metallic terminals on the backside with a fi nger or metallic object.
Note on disposal/transfer of SD card
The "Format" and "Delete" functions of this unit or a PC simply change the fi le management
information and do not erase the data in the SD card completely. Before disposing of or
transferring the SD card, it is recommended to destroy it physically or erase the internal
data completely using commercially available PC data erasing software.
It is the user’s responsibility to manage the data in the SD card properly.
SD card (LOCK switch)
The SD card has a switch for protecting the card against data write. Set the switch to the
LOCK position to protect the data in the card. Set the switch to the unlock position before
recording, transferring, editing or erasing the data.
Lock Unlock