Kenwood HC MGR-A7 - Manual (Page 31)

English 31
When recording audio using the built-in microphones or an external microphone, the
start of recording can be delayed from the moment the record button is performed.
This makes it possible to avoid recording the button operation sound, etc.
1 Select "Delay rec" from the pop-up menu.
(Built-in microphones or external microphone only)
Recording format
Recording destinat
Sync rec
Sync level
Delay rec
2 Specify the timer period.
Off
5sec
10sec
30sec
60sec
Enter Enter
Set from 5, 10, 30 and 60 seconds.
3 Start recording.
See page 32.
Delayed recording for starting recording
after a set delay
• To deactivate the delay recording, select "Off" in step 2.
• The default delayed recording mode set before this unit left the factory is "Off".
When sync recording using the built-in microphones or an external microphone is set,
the level at which recording starts can be set as described below.
The default sync detection level set before this unit left the factory is "Low". In an
environment with high ambient noise (in which the no-input status cannot be detected),
set the detection level to "Mid" or "High".
High When the ambient noise is high, etc., increases the level at which the start of music is detected.
Mid …
Low Detects the start of music at a low level.
1 Select "Sync level" from the pop-up menu.
(Built-in microphones or external microphone only)
To Home screen
Recording format
Recording destinat
Sync rec
Sync level
2 Select the sync level.
High
Mid
Low
Enter Enter
Setting the detection level of sync recording