Kenwood KR-V888D - Manual (Page 13)

1 3
Preparations
Operations
Other
KR-V888D (En/T)
−
+
R L
SURROUND
SPEAKERS
(4 − 16 Ω )
B
R L
FRONT SPEAKERS
(A OR B: 4 − 16 Ω ,
A AND B: 8 − 16 Ω )
ª · ª ·
A
R L
FRONT SPEAKERS
(A OR B: 4 − 16 Ω ,
A AND B: 8 − 16 Ω )
−
+
C
CENTER SPEAKER
(4 − 16 Ω )
ª · · ª
ª
·
SURROUND CENTER
PRE OUT
SUB
WOOFER
• Never short circuit the + and – speaker cords.
• If the left and right speakers are connected inversely or the
speaker cords are connected with reversed polarity, the
sound will be unnatural with ambiguous acoustic imaging.
Be sure to connect the speakers correctly.
1 Strip coating. 2 Loosen. 3 Insert. 4 Secure.
Connecting the speakers
Setting up the system
Right
Front Speakers A
Left Right
Use the FRONT
SPEAKERS B ter-
minals if you want
to connect a sec-
ond front speaker
system.
Left
(Be sure to connect both surround speakers)
Center Speaker
(4
Ω
~16
Ω
)
Surround
Speakers
(4
Ω
~16
Ω
)
Powered
subwoofer
Speaker impedance
When only one pair of speakers is
connected to the A or B speaker termi-
nals, use speakers having an imped-
ance of 4 to 16
Ω
, when two pairs of
speakers are connected to both A and
B terminals simultaneously, use speak-
ers having an impedance of 8 to 16
Ω
.
In this case, connecting a speaker hav-
ing an impedance of less than 8
Ω
may
cause malfunction of the receiver.