Kenwood KR-V888D - Manual (Page 35)

3 5
KR-V888D (En/T)
Operations
1
Press the DSP icon.
2
Select a DSP mode
ARENA : Simulates the presence of an
indoor concert arena.
JAZZ CLUB : Simulates the presence
of a jazz club.
STADIUM : Simulates the presence of
an outdoor stadium.
CHURCH : Simulates the presence of a
church with high ceilings.
THEATER : Simulates the presence of
a movie theater.
To select a DSP mode
To adjust the DSP modes
Adjusting the WALL type, ROOM SIZE, and EFFECT LEVEL let you create different types of surround effects.
1
Select a parameter .
WALL : Lets you choose from 3 different wall types(SOFT, MEDIUM, HARD).
ROOM SIZE : Lets you choose from 3 different room sizes (SMALL, MEDUIM,
LARGE).
EFFECT LEVEL : Lets you choose from 5 different effect levels (1, 2, 3, 4, 5).
2
Adjust the parameter using the TUNING/SKIP keys on the remote control.
3
Press MAIN to return to the main sound menu or press the SOUND key on
the remote to turn off the on-screen display.
4
Press either VIDEO, AUDIO, or TV key on the remote to cancel the OSD
remote control mode.
Ambience effects
= = MEDIUM MEDIUM ROOMSIZE
JAZZ CLUB ARENA STADIUM CHURCH THEATER
MAIN
= 3 EFFECT LEVEL WALL
= = MEDIUM MEDIUM ROOMSIZE
JAZZ CLUB ARENA STADIUM CHURCH THEATER
MAIN
= 3 EFFECT LEVEL WALL
Convenient functions
Midnight mode (Dolby Digital (AC-3) mode only)
When watching movies at night you might not be able to raise the
volume as loud as normal. Midnight mode compresses the dynamic
range of previously specified parts of the AC-3 sound track (like scenes
with sudden increases in volume) to minimize the difference in volume
between the specified and non-specified parts. This makes it easy to
hear all of the sound track, even when listening at low volumes.
Display dimmer adjustent
The DIMMER key on the front panel lets you select the brightness of
the receiver's display. You might find this useful if you darken your
room to watch movies or listen to music.
When the remote control is set to operate a video component, the
FUNCTION SHIFT and DISPLAY key combination can also be used to
change the display on the respective video component.
1Select the midnight mode icon.
2Adjust the parameter using the TUNING/SKIP keys on
the remote control.
• Some Dolby Digital (AC-3) software may not be compatible with the
Midnight mode.
• Midnight mode has no effect on parts of the sound track that are not
specified for compression.
Grey Light grey Dark grey
1 2 Off
A
PRO LOG IC
SP.
A
PRO LOG IC
SP.
A
PRO LOG IC
SP.
FUNCTION
SHIFT
DISPLAY
\
0
FUNCTION
SHIFT
DISPLAY
\
0
FUNCTION
SHIFT
DISPLAY
\
0
PRO LOGIC AC-3 3 STEREO DSP STEREO
OSD RT S.DIR SET
UP