Kenwood KR-V888D - Manual (Page 27)

2 7
KR-V888D (En/T)
Operations
Listening to radio broadcasts
1 Tune to the station you want to
store.
2 Press the MEMORY key while re-
ceiving the station.
1 Select tuner.
Presetting radio stations manually
Receiving preset stations
Keys or controls used in this operation.
The RDS auto memory function assigns preset numbers to
RDS stations starting from preset number "1". Therefore, be
sure to execute the RDS auto memory function before using
the following operations to manually store AM stations and
other FM stations, and RDS stations.
“Presetting RDS stations (RDS AUTO MEMORY)”.
§
• In addition to the RDS auto memory function, RDS stations can also be
stored manually in the preset memory.
• When storing radio stations manually, it may take a few minutes before
the "MEMORY" indicator appears in the display after pressing the
MEMORY key depending on receiving conditions.
Press the numeric keys in the following order:
For "15", press 0,5
For "20", press 0,0,)
• If you make a mistake entering a two digit number, press the +10 key
several times to return to the original display and start again.
MEMORY
Proceed to step 3 within 5 seconds.
(If more than 5 seconds elapse, press
MEMORY again).
4 5 6 7 8 9
3 Enter a preset number (1~40).
Preparation ÷
Select tuner.
Press the numeric keys in the following order:
For "15", press 0,5
For "20", press 0,0,)
• Repeat steps 1, 2 and 3 to store as many stations as necessary.
• If you store a station at a previously used preset, the old station will be
replaced by the new one.
• When RDS stations are stored manually in the preset memory, the PS
information may not be included in the memory depending on receiving
conditions.
A
15 89 )) . FM
MHz A
SP.
Preset number stored in memory
AUDIO
SHIFT MACRO
TV VIDEO
GUIDE REC
MUTE
VOLUME TUNING/SKIP
THEME FAV MENU
FUNCTION SHIFT SETUP
INFO ALT AUD TV/SAT/VID
REPEAT RANDOM +100
DISPLAY
ENT +10
LISTEN MODE SOUND SUBWOOFER
5 6 4
2 3 1
8 9 7
0
8
7
4 ¢ 6 BAND
P. CALL P. CALL
PHONES
1 2 3 4 5 6 7 8 9 0
STANDBY MUTE LEVEL INDICATOR
DIRECT MEMORY A B SPEAKERS AUTO TUNING BASS TREBLE BAND LEVEL CONTROL
INPUT SELECTOR VOLUME CONTROL
VIDEO
ON/STANDBY
DOWN UP
AV AUX
L - AUDIO - R
TA/NEWS/INFO. PTY DISPLAY +10/ PTY SEARCH
POWER
-ON –OFF
AUDIO − VIDEO SURROUND RECEIVER KR-V888D
T R A I T R
thermally reactive advanced instantaneous transistor
PRO LOGIC
3 STEREO STEREO
DSP
LOUDNESS
SOURCE DIRECT
DIMMER
MUTE
DOLBY DIGITAL
POWER
89 )) . FM
MHz
MEMORY
STEREO
TUNED
)-
Blinks for 5 seconds
Lights for 5 seconds
INPUT SELECTOR
2 Enter the number of the preset
you want to receive (up to "40").
• Each time you press the key, another preset station is received in order.
○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○
When you press ¢
1 =2=3= 38 =39=40=1=2=3=
When you press
4
1 +2+3+ 38 +39+40+1+2+3+
Holding down the button, lets you skip through the presets,
receiving each for 0.5 seconds apiece.
Receiving preset stations in order
(P.CALL)
When using the remote control, press AUDIO to select the
tuner control mode.
Preset numbers »
4 ¢
P. CALL P. CALL
Preset numbers «
4 5 6 7 8 9