KTM 1190 RC8 FR - Manual (Page 172)

MAINTENANCE WORK ON CHASSIS AND ENGINE
170
– Switch on the ignition by turning the orange programming key to the position .
EFI warning lamp (MIL) lights up, switches off, and then starts to flash.
The immobilizer indicator lamp lights up, switches off briefly, and flashes
according to the number of functioning black ignition keys including the orange
programming key. In this case once, since all black ignition keys are deacti-
vated.
– Switch off the ignition by turning the orange programming key to the position .
– Pull out the orange programming key.
All black ignition keys are deactivated.
– Order a new black ignition key according to the key number on the KEYCODECARD
and activate it.
Activating ignition key:
– Press the emergency OFF switch into the position .
– Insert the orange programming key in the ignition lock.
– Switch on the ignition by turning the orange programming key to the position .
EFI warning lamp (MIL) lights up, switches off, and then starts to flash.
The immobilizer indicator lamp lights up.
– Switch off the ignition by turning the orange programming key to the position .
– Pull out the orange programming key.
– Insert the black ignition key in the ignition lock.
– Switch on the ignition by turning the black ignition key to the position .
EFI warning lamp (MIL) lights up, switches off, and then starts to flash.
The immobilizer indicator lamp lights up, switches off briefly, and switches
on again.
– Switch off the ignition by turning the black ignition key to the position .
– Remove the black ignition key.