Engine control flash code – KTM 1190 RC8 FR User Manual
Page 201
ENGINE CONTROL FLASH CODE
199
Fault
Description
Possible cause
Action
13
EFI Warning lamp (MIL) flashes
1x long, 3x short
Input signal from intake air
temperatur sensor too high
– Check the intake air temper-
ature sensor.
x
14
EFI Warning lamp (MIL) flashes
1x long, 4x short
Input signal of pressure sensor
ambient air too low
– Check pressure sensor,
ambient air.
x
Input signal of pressure sensor
ambient air too high
– Check pressure sensor,
ambient air.
x
15
EFI Warning lamp (MIL) flashes
1x long, 5x short
Input signal from roll angle sen-
sor too low
– Check the roll angle sen-
sor.
x
Input signal from roll angle sen-
sor too high
– Check the roll angle sen-
sor.
x
17
EFI Warning lamp (MIL) flashes
1x long, 7x short
Malfunction in lambda probe
circuit (cylinder 1)
– Check lambda probe (cylin-
der 1).
x
18
EFI Warning lamp (MIL) flashes
1x long, 8x short
Malfunction in lambda probe
circuit (cylinder 2)
– Check lambda probe (cylin-
der 2).
x
24
EFI Warning lamp (MIL) flashes
2x long, 4x short
Malfunction in voltage supply
circuit to EFI control unit
– Check voltage supply to EFI
control unit.
x
25
EFI Warning lamp (MIL) flashes
2x long, 5x short
Malfunction in sidestand switch
circuit
– Check the sidestand
switch.
x
33
EFI Warning lamp (MIL) flashes
3x long, 3x short
Malfunction in injection valve
circuit (cylinder 1)
– Check injection valve (cylin-
der 1).
x
34
EFI Warning lamp (MIL) flashes
3x long, 4x short
Malfunction in injection valve
circuit (cylinder 2)
– Check injection valve (cylin-
der 2).
x
37
EFI Warning lamp (MIL) flashes
3x long, 7x short
Malfunction in ignition coil cir-
cuit (cylinder 1)
– Check the ignition coil
(cylinder 1).
x
38
EFI Warning lamp (MIL) flashes
3x long, 8x short
Malfunction in ignition coil cir-
cuit (cylinder 2)
– Check the ignition coil
(cylinder 2).
x