Changing the low beam bulb, Maintenance work on chassis and engine – KTM 1190 RC8 FR User Manual

Page 159

Advertising
background image

MAINTENANCE WORK ON CHASSIS AND ENGINE

157

Warning

Fire hazard The electrical system can be overloaded by the use of incorrect
fuses.
– Use only fuses with the prescribed amperage. Never by-pass or repair fuses.

– Use spare fuses with the correct rating only.

Fuse (75011088010) (

S. 213)

Fuse (75011088015) (

S. 213)

Info

If the new fuse burns out, contact an authorized KTM-RC8 workshop.

Tip

Replace the spare fuse in the fuse box so that it is available if needed.

– Close the fuse box cover.
– Fit the seat. (

S. 146)

9.60

Changing the low beam bulb

Note

Damage to reflector Keep the glass of the bulb free of grease.
– Clean the glass bulb with a clean cloth before mounting. Any grease on the glass will evaporate by the heat and be deposited on the

reflector.

– Switch off all power-consuming components and switch off the engine.

Advertising
This manual is related to the following products: