Troubleshooting – KTM 1190 RC8 FR User Manual
Page 196
TROUBLESHOOTING
194
10
TROUBLESHOOTING
Faults
Possible cause
Action
Engine doesn't crank when the electric
starter button is pressed
Operating error
– Carry out the steps for starting.
Battery discharged
– Recharge the battery.
x
– Check closed-circuit current.
x
Fuse
1, or 6 blown
– Change the fuses of individual power
consumers. (
Main fuse blown
– Change the main fuse. (
Ignition/steering lock or emergency OFF
switch defective
– Check the ignition/steering lock.
x
– Check the emergency OFF switch.
x
Safety start system defective
– Check the safety start system.
x
Immobilizer active
– Read flash code of immobilizer.
EFI control unit not activated
– Activate the EFI control unit.
x
Malfunction of CAN-Bus communication
– Check the CAN-Bus communication.
x
Combination instrument defective
– Check the combination instrument.
x
Engine cranks only if the clutch lever is
pulled
A gear is engaged
– Shift into neutral.
Safety start system defective
– Check the safety start system.
x
Engine cranks although it is in gear
Safety start system defective
– Check the safety start system.
x
Engine cranks but doesn't start
Fuse
5 blown
– Change the fuses of individual power
consumers. (
Coupling of fuel hose connection not joined
together
– Join coupling of fuel hose connection
together.
Plug connector of wiring harness oxidized
– Clean plug connector and treat with con-
tact spray.
Fault in fuel injection system
– Read the fault memory with KTM DIA.
x