Kenwood VR-606 VR-616 - Manual (Page 6)

6 EN
Names and functions of parts
0 TUNING 1/¡ keys
Use to operate the tuner mode.
If CD, MD or TAPE is selected as input the
source, these keys function as search keys.
! DISC SEL key
Use to operate other components.
INPUT SEL key
Use to operate other components.
@ DISC SKIP key
If CD is selected as the input source, this key
functions as the multi-CD player disc skip
key.
A/B key
If TAPE is selected as the input source, this is
A and B deck of a double cassette deck.
# TONE key *
Use to switch the status of TONE control.
$ LOUDNESS key *
Use to switch the status of LOUDNESS.
% POWER key %
Use to turn the receiver on or off.
^ RECEIVER key
Use to return to the operation of the
receiver.
& LISTEN MODE key ¢
Use to select the listening mode.
* INPUT MODE key
Use to switch between full auto, digital and
analog inputs.
( CINEMA EQ key *
Use to switch the status of CINEMA EQ.
) MUTE key *
Use to temporarily mute the sound.
¡ VOLUME +/- keys &
Use to adjust the receiver volume.
™ MENU key
Use to operate other components.
SOUND key
∞
Use to adjust the sound quality and the
ambience effects.
£ RETURN key
Use to operate other components.
¢ 3/8 key
If CD is selected as the input source, this key
functions as the play/pause key.
If MD or TAPE is selected as the input source,
this key functions as the play key.
BAND key
)
Use to select the broadcast band.
∞ 2 key
Use to operate other components.
FLIP key
Use to operate other components.
§ 8 key
Use to operate other components.
Use as dimmer function to adjust the
brightness of the display.
¶
¶ 7 key
If CD, MD, or TAPE is selected as the input
source, this key functions as the stop key.
AUTO key
&
Use to select the auto tuning mode.
• INPUT SELECTOR keys (DVD/6CH, CD/
DVD, AUX, TUNER, VIDEO 1, VIDEO 2,
MD/TAPE)
Use to select the input sources.
&
ª BASS BOOST key *
Use to select the maximum adjustment
setting for the low frequency range.
1 SOURCE key
Use to turn the other components ON/OFF.
2 REMOTE MODE keys (DVD, CBL, DSS/
SAT, VCR, TV, OTHERS) •
Use to select the components registered at
the respective input.
3 Numeric keys •
Provide functions identical to those of the
original remote control supplied with the
component you are controlling.
4 TV CONTROL keys
Use when in TV operation.
5 CH +/- keys
Use to select the channels.
¢ DVD 4 keys
When in DVD player operations, these keys
function as skip keys.
6 TOP MENU key
Use to operate the DVD component.
SET UP key
%
Use to select the speakers’ settings etc.
7 Joystick
ENTER
Use to operate other components.
MULTI CONTROL
5 / ∞ %
Use to control a variety of settings.
Use to operate other components.
P.CALL
4 / DOWN 2 and P.CALL / UP
¢ 3 ¡
Use for selection adjustments during SOUND,
SET UP and PRESET CHANNEL functions.
8 PAGE fi/% key
Use to operate the DVD component.
9 OSD key
Use to operate the DVD component.
If the name of a function is different on
the receiver and on the remote control,
the name of the remote control key in
this manual is indicated in parentheses.
Remote control unit
This remote control unit can be use not only for Kenwood products but also for other non-Kenwood products by setting the appropriate manufacturer’s
setup codes.
º
DVD
VCR
P.CALL
4 /DOWN
CBL
TV
+
DSS/SAT
OTHERS
RECEIVER
SOURCE POWER
CINEMA EQ
OSD RETURN
DISC SEL DISC SKIP
FLIP BAND
INPUT SEL A/B AUTO 8
DVD/6CH CD/DVD AUX TUNER
VIDEO 1 VIDEO 2 MD/TAPE
LOUDNESS TONE BASS BOOST
MUTE
DVD
TOP MENU
SET UP MENU
SOUND
P.CALL
/UP
¢
TV CONTROL
VOL.
ENTER
INPUT SELECTOR
MULTI
CONTROL
TUNING
¢
4
1 ¡ 2 6
7
™ £
™
1
4
7
+10
2
5
8
0
3
6
9
+100
VOLUME
- - INPUT
SEL
-
REMOTE MODE
LISTEN MODE
INPUT MODE
CH
™
PAGE
+ +
1
2
3
4
5
6
0
!
@
#
9
7
^
&
*
(
)
¡
™
£
¢
∞
§
¶
•
ª
$
%
8
*5228/01-06/EN 14/06/2002, 11:53 AM 6