Kyocera Data Security Kit (B) For Copier - Manual (Page 16)

1-14
Administrator Information
5 Enter the new management code using the numeric keys.
6 Press the Close key.
Step 3: Hard Disk Overwrite Setting
Selects the hard disk overwrite. See page 1-10 Hard Disk Overwrite for
further details.
Note Note that it does not apply to overwrite and formatting individually.
1 Press the Default Setting/Counter key.
2 Press the Machine Default key.
3 Use the numeric keys to enter the current Management code. The factory
default numbers are 80008000 for 80 cpm model and 60006000 for 60 cpm
model.
4 Select Hard Disk Overwrite from the left side setting field, and press the
Change # key.
5 Press 3-time Overwrite or Once Overwrite.
6 Press the Close key.
Management code change Back Close
Machine Default System Menu
Change the management code.
-
Use the numeric keys to set 8 digit numbers.
27451172
Clear
Hard Disk Overwrite Back Close
Machine Default
Select the hard disk overwrite.
Once
System Menu
3-time
Overwrite
Overwrite
-