Konica Minolta BIZHUB C203 - Manual (Page 160)

11 Function detail description
11-20 bizhub C203/C253/C353
6
Touch [Start], or press the [Start] key in the control panel.
– To cancel printing the job, touch [Cancel].
The document is printed.
11.4 Printing on a machine with the user authentication set up
When the user authentication function has been specified on the machine, a user name and password must
be entered when printing.
2
Reminder
If a print job is sent using a user name or password that is not valid for "Authentication Mode" on the
machine, or if a job is sent without setting up "User Authentication", the operation is not authenticated
by the machine and the job is canceled.
If the user authentication function is set up on the machine and the authentication operation restriction
function is set to mode 2, the relevant user is locked and access may be blocked if the authentication
information is not entered correctly.
The following three printer drivers support setup of this feature:
Konica Minolta PCL Printer Driver for Windows
Konica Minolta PostScript Printer Driver for Windows
PostScript PPD Printer Driver for Mac OS X
2
Note
If printing is not allowed, printing cannot be performed even when used by a registered user. For details
on the user authentication details, consult the administrator of this machine.
If performing user authentication with an optional authentication unit, enter the user name and
password. For refer to the manual provided with the authentication unit.